Views: 0 Author: Site Editor Publish Time: 2022-11-08 Origin: Site
Glass is a very common material in life, and also a widely used material, such as clean and transparent glass windows in buildings, mobile glass doors for isolation in bathrooms and balconies, and car glass. As long as you live on the earth, you can easily see it.
Glass plays such a big role, how can they be made into all kinds of shapes we want? We know that there are special glass cutting machines, but because the glass is fragile, there will be a lot of waste of materials by mechanical cutting, and few people use plasma and other machines by thermal cutting. In particular, if you want to cut any curve in the glass or make a hole in the glass, it is difficult for the general cutting machine to do. So what kind of cutting machine is appropriate?
At this time, the appearance of Integral Cast Frame Waterjet Cutting Machine, which has the advantages of non-contact cutting, non heating and environmental protection during cutting, has solved this technical problem well. When waterjet cutting machine cuts flat glass, it can process any geometric figure. Since no heat is generated during cutting, no scratch will be caused at the cutting seam; When cutting any curve and drilling holes, no mold is needed, which is flexible and convenient.
In a word, if you want to cut all kinds of arbitrary curves and make holes in architectural decorative glass, household appliance glass and automotive glass, you can choose a Waterjet Cutting Machine For Glass.
Rock wool consists of 60% diabase, 20% limestone and 20% coke. After being melted in a high-temperature furnace at 1500～2000℃, it is sprayed into filaments with a diameter of 0.005 mm, and then pressed the filaments into a plate with a density of 80～ 1000 kg/m³.High-pressure water jet cutting is the [Read More]