We will attend the 123rd Canton Fair on 15th-19th,April.Our booth No. is 1.1F16 We will attend the 123rd Canton Fair on 15th-19th,April.Our booth No. is 1.1F16
You are here: Home » News

News and Events

  • Product quality and service level are the foundation of enterprise development

    On April 8th, 2019, our engineers went to Poland for installation and debugging. This Poland customer has purchased three large machines from us, one set is 2000 mm * 6000 mm water jet cutting machine, and the other two sets are 2000 mm * 6000 mm plasma cutting machines, It shows that the quality of

  • Wuxi YC waterjet will attend 124th Canton Fair

    The Canton Fair is the first platform for promoting China's foreign trade and a barometer and weathervane for China's foreign trade. Therefore, the 124th autumn Canton Fair, Wuxi YC water jet will arrive as agreed.

  • YC Waterjet machine’s Saudi Arabia tour

    On July 31th, 2018, our engineers went to Saudi Arabia to help customers install and debug water jet machines.This customer has purchased three sets of water jet cutting machine with automatic drilling head from our company,he is absolutely our loyal customer . He used water jet mainly to cut rubber

  • YC water jet with roll-over stand will be exported to Egypt

    On August 3th, 2018, our company ushered in a client who came from Egypt. The customer came to check and accept the 4m*3m water jet machine with roll-over stand bought from our company.The client asked our engineer to cut the glass with his machine on the spot and was satisfied with the sample after

  • What is ultra high pressure water jet cutting robot?

    What is an ultra high pressure waterjet cutting robot? He is a set of water jet cutting system which is made of robot system, ultra high pressure system, softening water treatment system, safety protection system, electric control system and positioning die. It is suitable for many kinds of material

  • Oman customer check and accept YC 3D 5axis waterjet cutting system

    On May 14, 2018, our Oman clients came to our company to check and accept the 3D 5axis water jet cutting machine system they bought from our YC waterjet and learn how to operate this waterjet system. With the careful guidance of our engineers, customer quickly grasped the operation technology and tr

  • YC Waterjet meet with you at the 123rd Spring Canton Fair

    The 123rd Spring Canton Fair will be held at No.380 Yue Jiang Mid-way (Pazhou International Convention and Exhibition Center) in Haizhu District, Guangzhou. This time, we will also take CNC water jet cutting machine appeared. We are looking forward to your visit to inspect, negotiate and cooperate!O

  • America, YC Water jet come here again!

    The last day of January 2018, a YC waterjet will set out to America, this is the third set of YC waterjet sold in the United States since October of last year. In view of this, our YC water jet is becoming more and more popular with American customers.

  • How to correctly treat each part of waterjet machine?

    Water jet cutting machine need to configure the water supply system, and in order to prevent leakage when the pipe is connected, the thread of the steel pipe head must be higher than the screw gasket three teeth. If it is found that there is a fault in the water jet cutting machine, but it is not

  • Abrasive Waterjet Cutting Tips

    Hopefully you will find that reading through these tips might provide you with more insight into the process.Some of the tips are obvious, while others are only seen through experience.1. When cutting under 0.100 inch thick material little is gained by using medium (50 HP) or large (60 to 80 HP)cutt

  • Total 4 pages  Go to Page
  • Go



NO.3 Changfa Road Yangshan WuXi JiangSu, China  
 +86-138 6185 8095


© 2020  YC Water jet Technology Co.,Ltd  All rights reserved.