We will attend the 123rd Canton Fair on 15th-19th,April.Our booth No. is 1.1F16 We will attend the 123rd Canton Fair on 15th-19th,April.Our booth No. is 1.1F16
You are here: Home » News

News and Events

  • Oman customer check and accept YC 3D 5axis waterjet cutting system

    On May 14, 2018, our Oman clients came to our company to check and accept the 3D 5axis water jet cutting machine system they bought from our YC waterjet and learn how to operate this waterjet system. With the careful guidance of our engineers, customer quickly grasped the operation technology and tr

    2018-05-19
  • YC Waterjet meet with you at the 123rd Spring Canton Fair

    The 123rd Spring Canton Fair will be held at No.380 Yue Jiang Mid-way (Pazhou International Convention and Exhibition Center) in Haizhu District, Guangzhou. This time, we will also take CNC water jet cutting machine appeared. We are looking forward to your visit to inspect, negotiate and cooperate!O

    2018-04-14
  • America, YC Water jet come here again!

    The last day of January 2018, a YC waterjet will set out to America, this is the third set of YC waterjet sold in the United States since October of last year. In view of this, our YC water jet is becoming more and more popular with American customers.

    2018-02-09
  • How to correctly treat each part of waterjet machine?

    Water jet cutting machine need to configure the water supply system, and in order to prevent leakage when the pipe is connected, the thread of the steel pipe head must be higher than the screw gasket three teeth. If it is found that there is a fault in the water jet cutting machine, but it is not

    2017-11-03
  • Abrasive Waterjet Cutting Tips

    Hopefully you will find that reading through these tips might provide you with more insight into the process.Some of the tips are obvious, while others are only seen through experience.1. When cutting under 0.100 inch thick material little is gained by using medium (50 HP) or large (60 to 80 HP)cutt

    2017-10-27
  • How to maintain water jet cutting machine in winter?

    Water jet cutting machine is the "Darling" of today's cutting machinery because of its wide range of application. As the water jet machine is also a kind of machinery, it is necessary to maintain it, especially in the cold winter.Now let's tell you about the winter maintenance measures for the w

    2017-10-17
  • Could tempered glass be cutted by water jet machine?

    Recently a lot of customers call to our company to consult: Could tempered glass be cutted by water jet machine, how to cut?Tempered glass has high impact resistance (4~5 times higher than ordinary flat glass), high flexural strength (5 times higher than ordinary flat glass), good thermal stability,

    2017-10-10
  • YCWJ engineers provide professional after-sale service in Thailand

    During 10th-15th July 2017, our engineers visited the customer in Thailand for providing professional after-sale service.

    2017-07-10
  • Austrian customer came to inspect 3D 5 axis waterjet cutting machine

    From June 7th to June 8th, Austrian customers came to our company for inspecting the 3D MAX 5axis waterjet cutting machine they ordered.

    2017-06-07
  • Customers from Turkey, Peru and Germany successively visited our company

    On April 19, 2017,the customers come from Turkey, Peru and Germany successively visited our company. They went to the workshop to look at water jet cutting machine.After asking technicians about the relevant technical parameters of waterjet cutting machine ,they were very pleased with our machines.

    2017-04-19
  • Total 5 pages  Go to Page
  • Go

RECENT NEWS

OUR LOCATION

NO.3 Changfa Road Yangshan WuXi JiangSu, China  
 +86-138 6185 8095
 +86-510-83953128
sales@ycwaterjet.com

CONTACT SALES

© 2020  YC Water jet Technology Co.,Ltd  All rights reserved.