Recently, water jet cutting machine has been widely applied in all walks of life, almost every field of materials can be cut by abrasive water jet .
Waterjet cutting is an indispensable machine to promotes the application of carbon fiber materials in Auto Industry.
Water jet cutting machine need to configure the water supply system, and in order to prevent leakage when the pipe is connected, the thread of the steel pipe head must be higher than the screw gasket three teeth. If it is found that there is a fault in the water jet cutting machine, but it is not
Hopefully you will find that reading through these tips might provide you with more insight into the process.Some of the tips are obvious, while others are only seen through experience.1. When cutting under 0.100 inch thick material little is gained by using medium (50 HP) or large (60 to 80 HP)cutt
Water jet cutting machine is the "Darling" of today's cutting machinery because of its wide range of application. As the water jet machine is also a kind of machinery, it is necessary to maintain it, especially in the cold winter.Now let's tell you about the winter maintenance measures for the w
Recently a lot of customers call to our company to consult: Could tempered glass be cutted by water jet machine, how to cut?Tempered glass has high impact resistance (4~5 times higher than ordinary flat glass), high flexural strength (5 times higher than ordinary flat glass), good thermal stability,